How to Install a Ghost Immobiliser

A ghost immobiliser is a hidden security system that shields your vehicle from hacking and key cloning. It stops the engine from running until a PIN number is entered. It can be as long as 20 characters.

This additional layer of security is not visible to thieves who might not be aware of it. Some systems have an app which allows the owner to disarm their immobiliser if they forget their PIN or utilize the service/valet mode.

Connecting to the vehicle’s CAN bus

The Ghost 2 Immobiliser is an innovative security system that can be integrated into your vehicle’s ECU and provides a discrete security line against thieves. It is highly efficient and user-friendly and is a great option to add to your vehicle’s security arsenal. However, like any anti-theft device, it is not foolproof and requires regular maintenance to ensure its operation. Fortunately, this guide can help you get the most benefit from your Ghost 2 Immobiliser.

CAN (Controller Area Network) is a reliable serial network that lets microcontrollers communicate with each other over short distances without the need for central control units. It is designed to multiply electrical wiring in vehicles, which saves on copper. It has numerous advantages, such as low cost and easy use.

The CAN protocol is used in most modern vehicles to communicate with the engine management system, steering control module air conditioning controls and more. It also transmits sensor data like speed sensors and other inputs, to control the various features of the car. The CAN bus is used to monitor these diverse components, and prevent the vehicle from starting if they’re in an unsafe state.

It’s crucial to understand how the CAN bus functions and how it is secured. Using CAN bus can be a great way to add new features to your vehicle, but it’s essential to protect it from threats like hackers and other hacker. Installing a firewall, and monitoring your CAN-bus using software is the best way to do this.

Ghost2’s control device is hidden within the dashboard or wiring harness, preventing an intruder from physically altering it. It is also impossible to reset the PIN code or emergency code without access to the vehicle.

You can enable Transport Mode when you have to sell your car for service, valet parking or any other reason. This feature will disable the Ghost immobiliser’s keyfob and ignition functions, and will only come back on when the vehicle reaches 31 mph for a period of 15 minutes.

How do I create a PIN code

The Ghost immobiliser is a powerful security device that shields your vehicle from thieves. The most advanced technology utilizes the PIN code to disable the engine and block it from starting if you do not have the correct code or a valid fob or mobile device. Its discreet design ensures that the system is not noticed and offers unbeatable protection against theft. Additionally the system is TASSA tested and could provide significant savings on car insurance premiums.

During installation during installation, the Ghost system goes into an learning mode that records the sequence of buttons pressed to generate your unique pin code. The installer will guide you through activating the system once the pin code is created. Once activated the Ghost system disables the motor that starts your vehicle until you enter a valid pin or switch the vehicle to transport mode. This makes it extremely difficult for thieves to duplicate or hack your vehicle’s starter system.

Installing a Ghost immobiliser is easy however it is essential to follow the detailed instructions in the user manual to ensure that it operates properly. Multimeters and basic hand tools are a good way to check electrical values. Insulation tape, heat shrink tubing, and cable ties can be used to shield exposed wiring. Test the system on regularly to spot any potential issues.

Once the installation has been completed after the installation is complete, you must make a final test of the system before turning on your vehicle’s ignition. Ghost immobilisers will re-arm themselves after 3 to 30 second, dependent on the model of your car. The system also comes with a Service/Valet mode that lets you temporarily disable the system to service or valet parking.

The immobiliser should be placed in an inconspicuous location under the steering wheel or dashboard. It is recommended to use a small bit of paint or duct tape to mark the CAN H and L wires so that you can easily identify the wires during testing. Additionally, the CAN H and L wires should be connected to a source of power that provides continuous 12V. It is crucial to verify the connections again after testing, as an incorrect identification of these wires may cause system malfunction.

Activating the system

A ghost immobiliser prevents your car from starting when you press certain buttons on the vehicle, usually on the steering wheel, the door panel or the central console. The sequence is decided by the user and can be altered at any time. Once activated, go to the website cannot be deactivated. This makes it an ideal choice for anyone looking to protect their vehicle from theft.

The system is designed not to be detected by modern diagnostics and code-grabbing technologies. It does not emit radio frequency either which makes it harder for thieves to identify.

If the device is detected, it will prevent the engine from starting and will sound a loud alarm to scare off thieves. The device can be used to monitor the location of a car, which will aid in the search for the vehicle if it was stolen.

If you are interested in a ghost immobiliser, contact the experts at Car Specalist Customs to get a quote and discuss your options. We are certified to install ghost immobilisers on your vehicle. We will make sure that it is concealed in a location that is hard to reach. We can also install additional security measures, including a kill switch and wheel lock to ensure your vehicle is secure from theft.

Disarming the system

If you have a Ghost immobiliser fitted to your vehicle, it’s important to know how to disarm it. This will assist you in the case that you lock your keys in the car or if your battery goes out of. The system utilizes an individual PIN code that only you know, so the immobiliser will not be able to start your car without entering this code. Pressing a combination button on the dashboard or steering wheel is the easiest method to enter your code. This is a far simpler method than using the key fob, and it also prevents anyone from copying your remote.

In contrast to some aftermarket immobilisers that require cutting wires for installation, Ghost2 is non-invasive and works with your vehicle’s CAN bus network to operate. Its most prominent characteristic is that it disables the engine without affecting normal functions of the vehicle. This makes it difficult for thieves to use signal boosts or clone car keys. It doesn’t emit radio frequency, therefore thieves are unable to detect it.

The Ghost system has an option called Transport Mode which allows you to temporarily disable security for situations like transportation or service. This feature is ideal when you’re lending your vehicle out to someone else without sharing your PIN number, or if your vehicle needs to be kept secure even while you drive it. To activate Transport Mode you need to press the service button five times in a matter of 2 seconds. The Ghost system will confirm activation using 5 signal indicators.

Keep the emergency code inside your vehicle in a secure place. If you are ever locked out of your vehicle you can contact the technician or company who installed the system and they’ll provide you with the code. If you are unable to reach them, then you can contact an authorized dealer. However, this could require verification procedures and you may be charged for additional fees.

In addition to the convenience of this system, you can also depend on it to safeguard your vehicle from theft and help reduce the cost of insurance. Numerous insurance companies offer reduced costs or financial incentives for those who install this anti-theft system.